Learn IT - Books tags cad

Advanced Simulation and Test Methodologies for VLSI Design

Springer, 1989

With the advent of LSI and subsequently VLSI, technology has never witnessed such an unprecedented growth in the use of electronic systems in a wide range of applications. Although the ability to integrate several hundreds of thousands of transistors into a monolithic integrated circuit offers many advantages, a major concern in the...

Interconnect RC and Layout Extraction for VLSI

Trafford Publishing, 2012

This book provides detailed information on the interconnect RC and layout extraction in integrated circuit chips. The RC and layout extraction is a part of the job in the physical design and timing analysis for high-speed circuit design. The accuracy of interconnects RC model as well as the extracted device sizes from the physical layout are...

Automated Deduction in Geometry: Second International Workshop, ADG'98, Beijing

Springer, 1999

The Second International Workshop on Automated Deduction in Geometry (ADG ’98) was held in Beijing, China, August 1–3, 1998. An increase of interest in ADG ’98 over the previous workshop ADG ’96 is represented by the notable number of more than 40 participants from ten countries and the strong technical...

Mixed-Signal Layout Generation Concepts (The Springer International Series in Engineering and Computer Science)

Springer, 2003

Layout generation is an important topic in IC design. For digital circuits a lot of research has been conducted in this area, resulting in a large variety of books and layout generation tools. However, with the ever increasing frequencies, we are facing now significant analog types of artifacts in the IC, introduced during the...

Fabrication of SiGe HBT BiCMOS Technology

CRC Press, 2007

While the idea of cleverly using silicon–germanium (SiGe) and silicon (Si) strained-layer epitaxy to practice bandgap engineering of semiconductor devices in the highly manufacturable Si material system is an old one, only in the past decade has this concept become a practical reality. The final success of creating novel Si...

CMOS IC Layout: Concepts, Methodologies, and Tools

Newnes, 1999

Once upon a time, around about 1988, after finishing a very stressful but successful project within Motorola Semiconductor Israel (MSIL), the entire team was invited to a special lunch. Everybody was happy that we finished the “project” ahead of time, and we were there to enjoy the victory of “tape-out.”...

Introduction to Computer Graphics: Using Java 2D and 3D (Undergraduate Topics in Computer Science)

Springer, 2012

This book is an essential tool for second-year undergraduate students and above, providing clear and concise explanations of the basic concepts of computer graphics, and enabling the reader to immediately implement these concepts in Java 2D and/or 3D with only elementary knowledge of the programming language. Features: provides an ideal,...

Computed Tomography and Magnetic Resonance of the Thorax

Lippincott Williams & Wilkins, 2007

Computed Tomography and Magnetic Resonance of the Thorax was first published 21 years ago; it has been 7 years since the publication of the third edition. In retrospect it is truly amazing how much has changed...

Handbook of RF and Microwave Power Amplifiers (The Cambridge RF and Microwave Engineering Series)

Cambridge University Press, 2011

In 1989, I was responsible for organizing a workshop at the European Microwave Conference on High-Power Solid State Amplifiers. This workshop proved popular and so Artech House asked me to persuade the speakers to turn their material into a formsuitable for publication, the result was the book entitled “High-Power GaAs FET...

Fundamentals of Digital Logic with Verilog Design (Mcgraw-Hill Series in Electrical and Computer Engineering)

McGraw-Hill, 2002

Intended for an introductory course in digital logic design. The authors provide a balance between classical and modern design approaches. Basic concepts are introduced using simple log circuits, which are designed by using both manual techniques and modern CAD-tool-based methods.

...

Embedded Systems: Hardware, Design and Implementation

John Wiley & Sons, 2012

Covers the significant embedded computing technologies—highlighting their applications in wireless communication and computing power

An embedded system is a computer system designed for specific control functions within a larger system—often with real-time computing constraints. It is embedded as part of a...

Solidworks 2013 Bible

John Wiley & Sons, 2013

A comprehensive resource packed with information for both beginners and advanced users

SolidWorks is the leading 3D solid modeling software used in computer-aided design. It's powerful but not simple. This complete guide introduces beginners to the software but then goes far beyond, covering numerous details that...

Result Page: 12 11 10 9 8 7 6 5 4 3 2 1