Deep Sub-Micron (DSM) processes present many changes to Very Large Scale Integration (VLSI) circuit designers. One of the greatest challenges is crosstalk, which becomes significant with shrinking feature sizes of VLSI fabrication processes. The presence of crosstalk greatly limits the speed and increases the power consumption of the IC...
Over many years, RF-MEMS have been a hot topic in research at the technology
and device level. In particular, various kinds of mechanical Si-MEMS resonators
and piezoelectric BAW (bulk acoustic wave) resonators have been developed. The
BAW technology has made its way to commercial products for passive RF filters,
in particular...
This book was developed from lectures held at RWTH Aachen University, Germany
and Tsinghua University at Beijing, P.R. China. It may be used as a basis for similar
lectures on designing of microsystems. For this purpose, it is recommended to
follow the sequence of this book, because it is arranged such that following chapters
are...
A-Z guide to electrical/electronic and mechanical engineering design data. The ultimate sourcebook of electro-mechanical engineering design data is now better than ever, with thoroughly updated material, new discussions of engineering economics and elastomer springs. and a bounty of new drawings. Electro-Mechanical Design Handbook, Third...
The promise of MEMS for aerospace applications has been germinating for years, and current advances bring the field to the very cusp of fruition. Reliability is chief among the challenges limiting the deployment of MEMS technologies in space, as the requirement of zero failure during the mission is quite stringent for this burgeoning field....
Chemical vapor deposition (CVD) has grown very rapidly in the
last twenty years and applications of this fabrication process are now
key elements in many industrial products, such as semiconductors,
optoelectronics, optics, cutting tools, refractory fibers, filters and many
others. CVD is no longer a laboratory curiosity but a...
This book results from a meeting that took place in Cercedilla, Madrid, Spain in
March 2002. The meeting was about new ideas that could lead us to better use
of the solar spectrum with the ultimate goal of achieving superior photovoltaic
devices and, consequently, a reduction in their price. The meeting, despite being
short,...
Oscillation-Based Test in Mixed-Signal Circuits presents the development and experimental validation of the structural test strategy called Oscillation-Based Test – OBT in short. The results here presented allow to assert, not only from a theoretical point of view, but also based on a wide experimental support, that OBT is an efficient...
It is with great sense of gratitude and humility I take this blessed moment to offer this Seventh Edition of Piping Handbook. The challenge presented by the success of the Sixth Edition, coupled with our objective to enhance its reference value and widen its scope, motivated us to reach out and draw upon the recognized expertise on piping...
Nearly sixty years ago, the first successful demonstration of the transistor proved to be the herald of a new era of microelectronics. The ever-increasing complexity and functional speed of microelectronic circuits now containing tens of millions of transistors demand appropriate and rigorous test engineering activities during development and...
The aim of Molecular and Nano Electronics: Analysis, Design and Simulation is to draw together contributions from some of the most active researchers in this new field in order to illustrate a theory guided-approach to the design of molecular and nano-electronics. The field of molecular and nano-electronics has driven solutions for a...
Microelectromenchanical systems (MEMS) is a revolutionary field that adapts for new uses a technology already optimized to accomplish a specific set of objectives. The silicon-based integrated circuits process is so highly refined it can produce millions of electrical elements on a single chip and define their critical dimensions to...
